View this email in your browser
This Month's Tips From Aurifil & OLFA
We are back with our friends at Aurifil Threads with more tips, tricks and answers to some of our commonly asked questions.  Read on below for the details and share this email with a friend!

Grab the details you need and forward this email to a friend!
Replacing a Rotary Cutter Blade
  • To replace the blade, follow the directions that are included on the packaging. Take the cutter apart one piece at a time and lay the parts in the order you’ve removed them, then reassemble once you've replaced the blade.
  • Dispose of the blade in the container it came in, or a spare blade container, taping it shut to avoid it coming open. If you’re using a multi-pack of blades, carefully wrap the blade in several layers of paper or cardboard and taping securely with boxing or duct tape.
  • See all of our blade change instructions/videos HERE.
How Should I Place My Spool On My Machine? 

- Aurifil Cotton threads are cross wound on the spools which requires consideration for how the thread is delivered to the first machine thread guide.
– Position cross wound spools such that the thread is pulled over the top of the spool before making contact with the first guide.
– If the machine thread post is horizontal, be sure to secure the spool of thread with a cap that is smaller than the center spool diameter.   
– If the machine thread post is vertical, it’s best to draw the thread straight up over the top of the spool. On some machines this may require an external thread strand or guide be used.
Stay Informed and Be Inspired!
Follow us on social media.
Instagram Instagram
Facebook Facebook
Pinterest Pinterest

©2022 OLFA North America Inc. / OLFA U.S.A. Inc. OLFA® is a registered trademark of OLFA Corporation and used under license by OLFA North America, Inc. and OLFA U.S.A. Inc.

Our mailing address is:
OLFA U.S.A. Inc.
PO Box 10789, Terre Haute, IN 17801

Want to change how you receive these emails?
You can update your preferences or unsubscribe from this list.